0086-571-88220653 hzpt@hzpt.com
0 Točke
Izberite stran

Polžasti menjalnik serije WP


WP Series Worm Gearboxes

WP series worm gearbox is developed on the basis of the WD series worm gearbox. The housing is made of rigid cast iron with high strength, which can be suitable for harsh environments. It has various housing designs, the input forms include solid shaft input, hollow hole input, and flange input, and the output forms include solid shaft output and hollow hole output, so the WP series worm gearbox owns a variety of installation forms for option. It can be directly connected to the motor conveniently and be used with various mechanical equipment. It has a self-locking function under certain conditions, thus the braking device can be saved for mechanical equipment with braking requirements. WP worm gearbox is suitable for the reduction and transmission of various mechanical equipment in plastics, metallurgy, beverages, mining, lifting and transportation, chemical, and construction industries.

Cast Iron Worm Gearbox List–Metric Dimension

Pred nakupom potrdite naslednje parametre

  1.  Prosimo, potrdite model in velikost, ki jo potrebujete;
  2. Prosimo, potrdite razmerje hitrosti reduktorja;
  3.  Prosimo, potrdite aksialno smer.

Single Speed Worm Gearbox

razmerje: 1/5-1/60

WPA WPDA WPKA WPDKA
WPS WPDS WPKS WPDKS
WPO WPDO WPZ WPDZ
WPX WPDX WPKZ WPDKZ

Double Speed Worm Gearbox

razmerje: 1/100-1/3600

WPEA WPEDA WPEKA WPEDKA WPES
WPEDS WPEKS WPEDKS WPEO WPEDO
WPWEDO WPWEO WPEX WPEDX WPWEKO
WPWEDKO WPWE WPWED WPWEK WPWEDK

 

Universal Speed Worm Gearbox

razmerje: 1/5-1/60

WPW WPWD WPWK WPWDK WPWA
WPWDA WPWKA WPWDKA WPWS WPWDS
WPWKS WPWDKS WPWO WPWDO WPWKO
WPWDKO WPWX WPWDX WPWKT WPWDKT
WPWT WPWDT WPWKV WPWDKV WPWV
WPWDV

Delovni pogoji litoželeznega polžastega menjalnika

1. Hitrost polža reduktorja polžastega gonila ne sme presegati 1500r/min.
2. Temperatura delovnega okolja je – 40 ℃ -+40 ℃. Ko je temperatura delovnega okolja nižja od 0 ℃, se mazalno olje pred zagonom segreje nad 0 ℃. Ko je temperatura delovnega okolja višja od 40 ℃, se izvedejo ukrepi za hlajenje.
3. Vhodna gred reduktorja polžastega gonila se lahko vrti naprej in nazaj.
◆ Varnostni ukrepi:
1. Gredi polžastega gonila ni mogoče uporabiti kot vhodno gred.
2. Stroj ni dopolnjen z gorivom, ko zapusti tovarno. Uporabljati ga je mogoče šele po dodajanju dovolj strojnega olja.
3. Ujemanje Motor (tj. moč) ne sme preseči vrednosti, navedene na imenski ploščici.
4. Če želi uporabnik spremeniti smer gredi, lahko odstrani dva končna pokrova spodnje gredi, izvleče polžasto gred in jo nastavi za 180. Obremeni jo. Drugo gred lahko poganjate počasi, da postane mrežasta.

Structure Drawing of WP Series Worm Gearbox

Structure Drawing of WP Series Worm Gearbox

Features of Cast Iron WP Series Worm Gearbox:

1. Stabilen prenos, nizke vibracije, udarci in hrup, veliko redukcijsko razmerje, široka vsestranskost in se lahko uporablja z različno mehansko opremo.
2. Veliko prenosno razmerje je mogoče doseči z enostopenjskim prenosom, struktura pa je kompaktna. Večina vrst reduktorjev ima dobro samozaporno zmogljivost, zavorne naprave pa je mogoče shraniti za mehansko opremo z zahtevami za zaviranje.
3. Izguba zaradi trenja med polžastim navojem in površino zoba polž zobnik je velik, zato je učinkovitost prenosa nižja kot pri prestavi, enostavno se segreje in temperatura je višja.
4. Višje zahteve za mazanje in hlajenje.
5. Dobra združljivost, polžasta orodja in črvi so izdelani v skladu z nacionalnimi standardi in ležaji, oil seals, etc., are all standard parts.
6. The box body type includes the basic type (the box body is vertical or horizontal type with a footboard) and universal type (the box body is cuboid, with fixed screw holes on multiple sides, without foot board or another foot board, etc.).
7. There are two connection modes of the input shaft: basic type (single input shaft and double input shaft) and motor flange.
8. The position direction of the output and input axes is below and above the input axes; the Output shaft is up and down; the Input axis is up and down.
9. Za oblikovanje večstopenjskega reduktorja lahko uporabite dva ali tri reduktorske sklope, da dobite največje prenosno razmerje.

Značilnosti litoželeznega polžastega menjalnika
Značilnosti litoželeznega polžastega menjalnika

WP Series Worm Gearbox Installation Precautions:

(1) If the reducer is stored for 4-6 months, check whether the oil seal is immersed in the lubricating oil. The lip of the oil seal may stick to the shaft and even lose its elasticity. Since suitable elasticity is a necessary working condition for the oil seal, It is recommended to replace the oil seal;
(2) All rubber parts and ventilation holes must not be stained with paint;
(3) When connecting with the hollow shaft or solid shaft of the reducer, lubricating oil should be applied to the matching part of the shaft to avoid jamming or oxidation;
(4) The oil level must be checked during use (such as the oil level mirror hole or the oil plug, the small model does not have it);
(5) When using the new WP Worm Gear reducer machine, it cannot start at full load, and the load should be gradually increased.

WP Series Worm Gearbox Manufacturers & Suppliers

HZPT Machinery Co., Ltd. is one of the largest manufacturing companies of WP series worm gearboxes and RV series worm gearboxes in China. It has first-class processing equipment and testing equipment at home and abroad. It has introduced advanced technology from America, Japan, Germany, Italy, and other countries and has developed 11 series of worm gearboxes with more than 10,000 kinds of specifications. Products cover metallurgy, stone, woodworking, tobacco, food, leather, textile, glass, medical, chemical, light industry, rubber and plastic, and other industries; the products are shipped to Europe, America, and Southeast Asia.

WP Worm Gearbox Manufacturers
WP Worm Gearbox Suppliers
WP Worm Gearbox Manufacturers